Nuove cuffie TOP Sony !!!

La Sony sta per fare uscire nuove cuffie top di gamma (e relativa linea di cuffie), sia IEM che normali:
http://www.headfonia.com/new-sony-flagships-ex1000-and-z1000/

Interessanti soprattutto Z1000 e ZX700, le minori sembrano dei semplici restyling delle famigerate MDR-V300/150.


La Z1000:

Buongiorno!

Riporto anche qui alcune utili informazioni a riguardo di questa segnalazione.

Il prezzo "indicativo" reperito in rete è di circa: 61 950 Japanese yen = 736.3377 U.S. dollars

Una foto del nuovo trasduttore:

http://www.sonyinsider.com/wp-content/uploads/2010/09/y_MDR-Z1000_010.jpg

Il Link dove se ne parla in anteprima:

http://www.head-fi.org/forum/thread/510768/mdr-z1000-new-sony-flagship-headphones


Qualche anticipazione tecnica della nuova gamma SONY:

The MDR-Z1000, targeting audiophiles, features 360KJ/m3 High power neodymium magnet dedicated to reproduce clear and high resolution midrange, as well as removable Jack Cable. It provides an impressive frequency response of 5Hz – 80 000Hz, with an impedance of 24 Ohms, and a sensitivity of 106dB/mW. According to the Japanese manufacturer, the MDR-Z1000 adopts nice ear pad that promises perfect noise isolation. Beside this MDR-Z1000, Sony also added to their catalog the ZX700 model that features Magnesium / Aluminum case. It provides a frequency response of 5Hz – 40 000Hz, with a sensitivity of 106dB/mW, an impedance of 24 Ohms. They respectively cost 61950 Yens (570€ / 735$) and 12390 Yens (115€ / 145$)
The first one will be release on November 10th, while the MDR-ZX700 will be available on October 10th.
One of the biggest features of the Z1000 is the 50mm driver unit and the ability to handle frequencies of 5-80,000 Hz. This is very similiar to the previously released MDR-Z900HD, but a major difference is that the Z1000 can handle a maximum input of 4,000mW.The Z1000 is also one of the first headphones by Sony to use a liquid crystalline polymer diaphragm, which is nearly five times as strong as conventional designs and reduces inner plate vibration significantly. If you eliminate or greatly suppress vibration in a headphone, it enables a much more accurate listening experience and greater fidelity. Signal purity is almost no question with the integration of oxygen free copper (OFC) wires, which boast a 7N signal grade, and will ensure low distortion and minimal signal loss. There is also a new gasket that covers the gap between the housing and the driver unit to enhance sound isolation from the outside world while preventing sound leakage.

The MDR-ZX500, comes with 40mm driver. Here again, we have a 360KJ/m3 High power neodymium magnet. Available in Black ou White, it offers a frequency response of 8Hz – 25 000Hz, as well as 104dB/mW sensitivity, an impedance of 70 Ohms.

The MDR-ZX300 adopts 360KJ/m3 Neodymium magnet and provides a frequency response of 10Hz – 24 000Hz, with a sensitivity of 102dB/mW, and an impedance of 24 Ohms (3675Yens / 35€ / 45$), while the MDR-ZX100 offers a frequency response of 12Hz – 22 000Hz, a sensitivity of 100 dB/mW, and an impedance of 24Ohms (2468 Yens / 23€ / 29$)

Buoni Ascolti!