Ciao a tutti, propongo un super affarone, in pratica ho ordinato il cavo ma poi son passato ad una nuova cuffia con altri connettori, quindi le specifiche del cavo sono quelle riportate alla pagina: Pagate 125,24 € Non ancora arrivate!
Chiedo 90€ Comprese le spedizioni e accetto proposte sensate dai. (se non siete zona Milano altrimenti consegna a mano e ti regalo anche la custodia rigida per le cuffie!) che ne dite? Il cavo è bilanciato XLR da 3 mt
Rispondetemi anche qui con una vostra email se non potete mandare PM.
Grazie
"
Capacitance: Capacitance adds a small delay to the sound, which varies with frequency and can cause roll off, so keeping it as low as possible helps make sure the signal stays clean. With our ultra-low capacitance cables the audible improvement over a stock cable can be heard and easily measured. Our ultra-low capacitance cables typically measure between 7.5-40pF up to 2m with smaller connectors or up 90pF for longer 3-4m cables with larger connectors. This is still a significant difference against most stock cables, for example the Sennheiser HD650/HD600 stock cable averages over 600pF.
Customisation: Our ULC cables are all handmade to order here in the UK. We can make them in custom colour combinations of your choice, using four strands of paracord, where we recommend using just one or two colours to give either a solid colour or a two-tone stripe look. Our standard cable length is 1.5m, with any length up to that being the same price. We charge extra for every half meter up to a maximum length of 4m. We offer a choice of jacks and other connectors for use with balanced amps such as XLR’s or 2.5mm TRRS for A&K/Onkyo. For standard unbalanced jack options please see the unbalanced cable listing here. Any questions regarding our customisation options just drop us an email.
Ergonomics: The cable is very flexible, fairly lightweight and soft thanks to the paracord covering. In addition it is not prone to kinking.
Resistance: Each of the four wire cores is made up of 84 strands of individually insulated copper wire, which gives a lower resistance than most OFC cables (so less insertion loss). The cable is hand braided, twisted from the Y split to cut RFI and EFI down. It also reduces the inductance and crosstalk you may get from a straight parallel wire setup. Silver solder is used to keep the signal path as clean as possible.
Skin Effect: Any skin effect will have a negligible influence on audio frequencies as this cable is made from woven litz, with each strand only 0.07mm across. Essentially there is no skin effect until you get over 700Khz, well above audible frequencies.
Warranty & Servicing: All our cables have a 2 year warranty. If you experience any problems beyond 2 years we offer sensibly priced repairs. This is true of alterations too, so if in the future you need the cable to be shortened or re-terminating for a new amp we can do that for a sensible price as well. We show our appreciation for repeat business by offering 10% off any additional ULC cables after one has been purchased. Tampering with or attempting to repair your cable may void your warranty.
"
Chiedo 90€ Comprese le spedizioni e accetto proposte sensate dai. (se non siete zona Milano altrimenti consegna a mano e ti regalo anche la custodia rigida per le cuffie!) che ne dite? Il cavo è bilanciato XLR da 3 mt
Rispondetemi anche qui con una vostra email se non potete mandare PM.
Grazie
"
Details
This is an audiophile grade, ultra-low capacitance cable for the Sennheiser HD6XX / HD660 /HD600 / HD650 / HD25SP / HD565 / HD580 to give a balanced connection to devices such as the Pono player or balanced XLR / TRRS amps.Capacitance: Capacitance adds a small delay to the sound, which varies with frequency and can cause roll off, so keeping it as low as possible helps make sure the signal stays clean. With our ultra-low capacitance cables the audible improvement over a stock cable can be heard and easily measured. Our ultra-low capacitance cables typically measure between 7.5-40pF up to 2m with smaller connectors or up 90pF for longer 3-4m cables with larger connectors. This is still a significant difference against most stock cables, for example the Sennheiser HD650/HD600 stock cable averages over 600pF.
Customisation: Our ULC cables are all handmade to order here in the UK. We can make them in custom colour combinations of your choice, using four strands of paracord, where we recommend using just one or two colours to give either a solid colour or a two-tone stripe look. Our standard cable length is 1.5m, with any length up to that being the same price. We charge extra for every half meter up to a maximum length of 4m. We offer a choice of jacks and other connectors for use with balanced amps such as XLR’s or 2.5mm TRRS for A&K/Onkyo. For standard unbalanced jack options please see the unbalanced cable listing here. Any questions regarding our customisation options just drop us an email.
Ergonomics: The cable is very flexible, fairly lightweight and soft thanks to the paracord covering. In addition it is not prone to kinking.
Resistance: Each of the four wire cores is made up of 84 strands of individually insulated copper wire, which gives a lower resistance than most OFC cables (so less insertion loss). The cable is hand braided, twisted from the Y split to cut RFI and EFI down. It also reduces the inductance and crosstalk you may get from a straight parallel wire setup. Silver solder is used to keep the signal path as clean as possible.
Skin Effect: Any skin effect will have a negligible influence on audio frequencies as this cable is made from woven litz, with each strand only 0.07mm across. Essentially there is no skin effect until you get over 700Khz, well above audible frequencies.
Warranty & Servicing: All our cables have a 2 year warranty. If you experience any problems beyond 2 years we offer sensibly priced repairs. This is true of alterations too, so if in the future you need the cable to be shortened or re-terminating for a new amp we can do that for a sensible price as well. We show our appreciation for repeat business by offering 10% off any additional ULC cables after one has been purchased. Tampering with or attempting to repair your cable may void your warranty.
"
Ultima modifica di ZioOscar il Dom Gen 24 2021, 20:14 - modificato 3 volte.